MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
COMPONENT INSTALLATION
6. Install the ladder spacer, using four HHCS M12 X 1.75 X 40.00 mm X 10.9 bolts, eight
12 mm washers and four 12.00 X 1.75 X 10.9 nuts. Torque bolts to specifications in the
appendix.
Finish installing the snow wing before installing the ladder onto the spacer.
IF REQUIRED TO INSTALL THE LADDER,
REMOVE THE SHEET METAL BRACKETS
AND TRIM THE SHEET METAL.
Weldco-Beales Manufacturing
LADDER SPACER
HHCS M12 X 1.75 X 40.00MM X 10.9
12 MM WASHERS
12.00 X 1.75 X 10.9 NUTS
WBM
Page 15