Functions; Angling The Moldboard - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
OPERATION
FUNCTIONS, ANGLING THE MOLDBOARD

Functions

The WBM snow wing has up to three functions: angling the moldboard, raising the lift-
frame, and raising the moldboard. Each function is operator controlled.

Angling the Moldboard

Extend and retract the pushpole to angle the moldboard away from and towards the
grader.
Do not activate float valve (if applicable) when wing is off the ground. Failure to do so can result
in property damage, serious injury or death.
Weldco-Beales Manufacturing
! CAUTION
WBM
PUSHPOLE RETRACTED
PUSHPOLE EXTENDED
Page 36