To Raise The Snow Wing For Transport - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
OPERATION
FUNCTIONS, TO RAISE THE SNOW WING FOR TRANSPORT

To Raise the Snow Wing for Transport

1. Set the moldboard stop to its outermost position.
2. Start the grader engine and run at low idle.
3. Ensure all personnel and property are clear before operating the snow wing.
4. Raise the snow wing moldboard to full height by raising the snow wing lift-frame.
Weldco-Beales Manufacturing
WBM
Page 39