WBM KOMATSU GD655-6 Manual page 24

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
HYDRAULIC INSTALLATION
Hydraulic Installation
1. Install the WBM hydraulic valve on the valve mounting plate.
2. Identify which hoses are for which hydraulic circuits (lift cylinder, lift-frame cylinder,
pushpole assembly, pump, tank, load sense line).
3. Route the snow wing moldboard lift cylinder hoses from the lift cylinder to the WBM
valve. See photo below.
Weldco-Beales Manufacturing
VALVE PARALLEL
TO LIFT-FRAME
WBM
MOUNT THE HOSES AS
SHOWN
Page 24