Daily Inspections (Static) - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
MAINTENANCE

DAILY INSPECTIONS (STATIC)

Daily Inspections (Static)
Grease all lubrication points at the start of each shift.
Perform daily visual inspections on/for:
• Structural integrity of the attachment, look for excessive wear, cracking, damage:
• Check all cylinders and cylinder anchor points.
• Check all contact faces.
• Inspect all welds and components for cracks or damage. Contact WBM for
recommended welding procedures before repairing any welds.
• Check all accompanying components.
• Hydraulic components (hoses, hose ends, fittings, cylinders, valves, etc.) and
connections for leakage or damage.
• Inspect all bolts for tightness and installation (see appendix for torque specs).
• Keep the attachment free of dirt, debris, or foreign material.
Any cracks or component damage must be repaired prior to any operation of the attachment.
Failure to repair damaged or worn components may result in property damage, serious injury or
death.
When inspecting the hydraulic components for damage, ensure the correct Personal
Protective Equipment is being used and the machine's hydraulic engage function has been
disengaged.
All hydraulic leaks or damage must be repaired prior to any and all operation of the
attachment. Failure to repair damaged or worn components may result in property damage,
serious injury or death.
Weldco-Beales Manufacturing
! WARNING
WARNING
!
WARNING
!
WBM
Page 42