Raising The Moldboard - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
OPERATION
FUNCTIONS, RAISING THE MOLDBOARD

Raising the Moldboard

Extend and retract the snow wing lift cylinder to raise and lower the moldboard.
Use safety cable when wing is in the up position and when in transit. Failure to do so can result in
property damage, serious injury or death.
Disconnect safety cable before operating snow wing. Stow cable in a safe location. Failure to do
so can result in property damage, serious injury or death.
Weldco-Beales Manufacturing
WARNING
!
WARNING
!
WBM
SNOW WING LIFT
CYLINDER EXTENDED
SNOW WING LIFT
CYLINDER PARTIALLY
RETRACTED
Page 38