WBM KOMATSU GD655-6 Manual page 22

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
COMPONENT INSTALLATION
14. Position the pushpole stop and fully weld. The pushpole should contact the
moldboard stop and rear mount pushpole stop at the same time and be fully
centred on the stops while in the transport position.
7018 ROD OR
3/8
EQUIVALENT
15. Install hydraulic components.
Weldco-Beales Manufacturing
WBM
THE PUSHPOLE AND
MOLDBOARD STOP MUST
CONTACT AT THE SAME
TIME.
Page 22