WBM KOMATSU GD655-6 Manual page 28

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
HYDRAULIC INSTALLATION
8. Connect the WBM hydraulic valve to the machine's hydraulic valve.
See parts pages for hydraulic schematic.
The WBM hydraulic valve connects to the machine's hydraulics in three places: the
tank, the pump and the load sense line.
i. Tank line: route the WBM provided hydraulic hose from the WBM valve to the
factory tank line.
Confirm the factory tank line is on the right side of the machine frame.
Disconnect the tank line and install the provided reducing tee. Re-install the
factory tank line and connect the WBM hydraulic tank line hose.
WBM
HYDRAULIC
VALVE
Weldco-Beales Manufacturing
WBM
MACHINE'S
FACTORY
TANK LINE
(RIGHT SIDE)
Page 28