WBM KOMATSU GD655-6 Manual page 17

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
COMPONENT INSTALLATION
10. Fit and fully weld the rear mount to the Komatsu ripper mount and back plate:
i. Position the rear mount so it is level and so the bottom of the rear mount is
24 5/8 inches from the ground. Check that the diesel exhaust fluid tank door
(DEF tank door) can fully open.
24 5/8
Weldco-Beales Manufacturing
DEF
DOOR
WBM
Page 17