WBM KOMATSU GD655-6 Manual page 25

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
HYDRAULIC INSTALLATION
4. Connect the pushpole extension cylinder to the WBM hydraulic valve.
There are two bulkheads between the valve and cylinder: one on the snow wing
rear mount, and one on the rear of the motor grader. Install hoses and fittings on the
bulkheads.
Weldco-Beales Manufacturing
WBM SUPPLIED BULKHEAD
ON REAR OF GRADER FRAME
BULKHEAD ON
REAR OF MOTOR
GRADER
BULKHEAD ON
SNOW WING
REAR MOUNT
WBM
Page 25