Component Installation - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION

COMPONENT INSTALLATION

Component Installation
1. Remove the ladder from the right side of the machine. Save the ladder mounting
hardware for the ladder re-install.
The sheet metal and brackets around the ladder spacer may need to be removed
or trimmed. Remove and trim as required.
2. Reposition the right side work light.
i. Remove the work light from the right side of the machine.
ii. Mount the light and bracket to the right side of the ladder and re-install the light.
See photo below. Finish snow wing installation before re-installing the ladder.
Weldco-Beales Manufacturing
IF REQUIRED TO INSTALL THE LADDER SPACER,
REMOVE THE SHEET METAL BRACKETS AND
TRIM THE SHEET METAL.
INSTALL THE RIGHT SIDE WORK LIGHT ON THE
LADDER.
WBM
Page 11