WBM KOMATSU GD655-6 Manual page 27

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
HYDRAULIC INSTALLATION
5. Install the hydraulic relief valve on the front lift-frame mount.
6. Route hoses from the WBM hydraulic valve to the lift-frame relief valve.
7. Route hoses from the lift-frame cylinder to the relief valve.
The hoses will need to go from the cylinder, through the left side of the lift-frame,
and loop around the back to connect to the relief valve. See photo below.
Weldco-Beales Manufacturing
ROUTE HOSES THROUGH THE SIDE OF THE
SNOW WING FRONT MOUNT AND AROUND
TO THE HYDRAULIC RELIEF VALVE.
WBM
Page 27