WBM KOMATSU GD655-6 Manual page 12

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
COMPONENT INSTALLATION
3. Prepare the motor grader frame for the front lift-frame installation.
Check that the snow wing front lift-frame, when installed, will not interfere with any
mounts, clamps or other components on the motor grader frame.
The factory work light mount bars may need grinding to fit the lift frame mount. See
photo below.
RIGHT SIDE
WORK LIGHT MOUNT
4. Move the canister on the right side of the motor grader. Use the provided spacer
and bolts. See photo below.
Weldco-Beales Manufacturing
GRIND THE WORK LIGHT
MOUNT BARS TO FIT THE
FRONT LIFT-FRAME, IF
REQUIRED.
CANISTER
SPACER
WBM
LEFT SIDE
WORK LIGHT MOUNT
Page 12