MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
OPERATION
FUNCTIONS, TO RAISE THE SNOW WING FOR TRANSPORT
5. Lift the moldboard by retracting the lift cylinder until the pushpole contacts the
moldboard stop.
6. Attach the safety cable between the rear mount and the pushpole when the
machine is in transit.
Use safety cable when wing is in the up position and when in transit. Failure to do so can result in
property damage, serious injury or death.
Disconnect safety cable before operating snow wing. Stow cable in a safe location. Failure to do
so can result in property damage, serious injury or death.
Weldco-Beales Manufacturing
WARNING
!
!
WARNING
WBM
Page 40