XPC500 / XPC600 GRAPPLE
PARTS, SERVICE AND INSTALLATION
INSTALLATION
ELECTRICAL INSTALLATION
Electrical Installation (If Applicable)
See Electrical Schematic in parts book. Connect grapple to electrical control harness,
as applicable.
Electrical wire can be routed through the cabin floor or through access doors (not
doorways). Care should be taken to avoid running the wires in such a way as to create
tripping hazards or to expose them to extreme abrasion. Wires should be affixed
appropriately.
Once installation is complete, cycle the grapple's functions and ensure proper
clearances for the wires.
The grapple is controlled by the joystick control/ buttons (usually supplied by OEM
manufacturer) in the cab.
Weldco-Beales Manufacturing
WBM
Page 23