Installation - WBM XPC500 Grapple Parts, Service And Installation

XPC500 / XPC600 GRAPPLE
PARTS, SERVICE AND INSTALLATION

INSTALLATION

Installation
Complete The Grapple Installation Report before the grapple is put into service.
Installation of the attachment is to be done by a qualified service technician. Ensure the
technician has read and understands the manual before starting installation. Failure to comply
may result in property damage, serious injury or death.
Inspect all assemblies and shipped loose components for damage, shortage or
discrepancies.
1. Remove the stop plate assembly. The stop plate assembly is only tack welded and
will require repositioning and welding.
2. Pin the WBM grapple onto the stick. Use supplied pin and mounting hardware. Shim
as required, to minimize side to side movement.
Weldco-Beales Manufacturing
!
STOP PLATE
ASSEMBLY
SIDE PLATES
(TRIM AS PER
INSTRUCTIONS)
PIN
STICK
Attachment may not be exactly as illustrated
WARNING
WBM
SHIM
SHIM
Page 9