Preparing The Product For Use; Transportation - Otto Bock 743L500 3D L.A.S.A.R. Posture Instructions For Use Manual

Preparing the product for use

4 Preparing the product for use
INFORMATION
This document must be observed for installing the product and putting it into operation.
► NOTICE! To avoid loss of functionality and damage to the product, only use components, spare parts
and software approved by the manufacturer.

4.1 Transportation

10
► NOTICE! To avoid damage during transporta­
tion, do not expose the product to severe vibra­
tions, extreme temperatures and high relative
humidity. Always keep the slider of the cable
feedthrough closed during transportation to
keep out foreign objects, dirt and humidity.
► Always use the product case for transportation.
► Lock the elements of the stand using the swivelling
transport locking devices.
► Either lift the closed case by one of the two carrying
handles or roll it, holding it by the extendable
handle.
743L500 3D L.A.S.A.R. Posture