Preparing The Product For Use - Otto Bock 17F24 Series Instructions For Use Manual

CAUTION
Use under restricted environmental conditions
Risk of injury due to damage to the product
► Do not expose the product to restricted environmental conditions.
► If the product has been exposed to restricted environmental conditions,
check it for damage.
► If damage is apparent or in case of doubt, do not continue using the
product.
► Take suitable measures if required (e.g. cleaning, repair, replacement,
inspection by the manufacturer or a specialist workshop etc.).
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
► Avoid contact with abrasive substances (e.g. sand, dust).
► Do not expose the product to temperatures below -10 °C (14 °F) or
above +60 °C (140 °F) (e.g. sauna, excessive sunlight, drying on a
radiator).
NOTICE
Thermal overloading of the product
Damage due to improper thermal treatment
► Do not carry out any heat treatment at temperatures above 300 °C
(570 °F).
► Prior to thermal treatment, remove all temperature-critical components
(such as plastic parts).

5 Preparing the product for use

CAUTION
Incorrect alignment or assembly
Injuries due to changes in or loss of functionality
► The product may only be installed by trained, qualified personnel.
► Observe the alignment and assembly instructions.
14