•
2 pc. bracket cover
•
1 pc. lamination ring
•
1 pc. 13Z146 lamination ring (for Axon-Bus terminal device)
•
1 pc. clamp ring
•
4 pcs. mounting brackets
•
1 pc. spherical cord lock
•
4 pc. Cable ties
•
4 pcs. oval head self-tapping screw
•
1 pc. Instructions for use (qualified personnel)
•
1 pc. Technical information (qualified personnel)
5.2 Accessories
•
757L500 AxonCharge Integral
•
13E500 AxonMaster
•
9S501 AxonRotation Adapter (passive rotation unit)
•
13E200=* or 13E202=* electrode
•
"560X500=* AxonSoft" adjustment software
•
Axon-Bus terminal device (e.g. 8E500 Michelangelo hand)
•
9X18 Cable pull switch
•
Prosthetic glove (e.g. 8S500=R/L AxonSkin Natural when 8E500 Michelangelo hand is used)
Additional MyoBock components such as suction socket electrode, electrode cable, pull-in tube and tube valve for
suction socket as needed.
6 Preparing the product for use
6.1 Installing the AxonRotation Adapter
AxonArm Ergo 12K501=*
1) Use silicone grease to seal the plug connection.
2) Connect the AxonRotation Adapter with the con
necting cable.
3) Position the AxonRotation Adapter such that the
middle screw holes on the lamination ring can
be used.
INFORMATION: The other screw positions can
be used for correcting the alignment of the
AxonRotation Adapter after the lamination ring
has been glued in.
4) Screw the AxonRotation Adapter to the lamination
ring.
Preparing the product for use
9