Delivery; Final Inspection; Transport To The Customer; Handing Over The Product - Otto Bock C1000 DS Instructions For Use Manual

Hide thumbs Also See for C1000 DS:
Table of Contents

Advertisement

7 Delivery

7.1 Final inspection

A final inspection must be performed before delivery of the power wheelchair:
Was the product fitted optimally to the physical and mental condition of the user (e.g. seat, arm support/side
panel, leg supports, control panel)?
Are the batteries charged?
Is the tyre pressure correct (see tyre sidewall and the section "Technical data" for information)?
Do all manual and power functions work properly?
Do all control functions work properly?
Do the brakes work?

7.2 Transport to the customer

Instructions for disassembly and transport: see Page 64.

7.3 Handing over the product

WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe handover of the product:
Have the user get into the product and perform a trial seat fitting. Pay special attention to proper positioning
according to medical considerations.
The user and any attendants must be instructed in the safe use of the product. The instructions for use in par­
ticular have to be used.
The instructions for use must be given to the user or an attendant upon delivery of the wheelchair.
The user or attendant should acknowledge that they have been instructed in how to use the product and were
informed of the residual risks.
Depending on equipment: The supplied instructions for use for accessories have to be handed over in addi­
tion.

8 Use

8.1 Circuit breaker

INFORMATION
► Should the automatic circuit breaker deactivate repeatedly after activation for no discernible reason, contact
the qualified personnel.
► For shipping or when the power wheelchair is not being used for an extended period of time, the automatic
circuit breaker should be deactivated.
The automatic circuit breaker has to be activated before the power wheelchair can be switched on.
It is located under the seat between the drive wheels.
C1000 DS
Delivery
19

Advertisement

Table of Contents
loading

Table of Contents