Safety; Explanation Of Warning Symbols; Safety Instructions For Assembly And Adjustments; Safety Instructions For Use - Otto Bock C1000 DS Instructions For Use Manual

4 Safety

4.1 Explanation of warning symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

4.2 Safety instructions for assembly and adjustments

WARNING
Making incorrect adjustments
Risk of falling, tipping over or malposition of the user due to incorrect settings
► Settings may only be changed by qualified personnel unless otherwise prescribed.
► Before testing setting changes with the user seated, all screw connections must be firmly tightened.
► Check the product for safety and functionality after changing the settings.

4.3 Safety instructions for use

WARNING
Improper product operation
Falling, tipping over, collision due to user error
► The product may only be used by a qualified user.
► As a user or attendant, you must be trained in the use of the product by qualified personnel.
► Read the entire instructions for use.
► The product may not be used in case of exhaustion or under the influence of alcohol, medications or drugs.
► The product may not be used by users who have any mental limitations which can temporarily or permanently
limit attentiveness and judgement.
► Observe road traffic regulations during operation in public road traffic.
WARNING
Impermissible use
Risk of pinching, crushing, being pulled in, tipping, falling due to improper handling
► Only use this product for its original intended purpose.
► Only one person may be transported with the product at any one time.
WARNING
Overloading
Severe injuries if the product tips over due to overloading, damage to the product
► Do not exceed the maximum load capacity (see the nameplate and section "Technical data").
► Please note that certain accessories and add-on components will reduce the remaining load capacity.
WARNING
Exceeding the service life
Serious injuries due to failure to observe the manufacturer's requirements
► Using the product beyond the specified expected service life leads to increased residual risk.
► Observe the specified service life.
CAUTION
Skin damage
Skin damage or pressure points due to overloading
► Check your skin for intactness before and during use of the product.
► Pay attention to diligent skin care and pressure redistribution during interruptions in using the product.
► If skin damage or other problems occur during use, stop using the product. Consult the qualified personnel.
C1000 DS
Safety
9