Care; Safety Instructions; Cleaning; Disinfection - Otto Bock C1000 DS Instructions For Use Manual

8.18 Care

8.18.1 Safety instructions

CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Water must not come into direct contact with the electronics, motor or batteries under any circumstances dur­
ing cleaning. Never use a water jet or high-pressure cleaning apparatus to clean the product.
► To avoid contamination with germs, clean seat cushions and back support upholstery whenever they get
soiled.
► Check the driving behaviour of the product after cleaning it.
INFORMATION
Piston rods do not require lubrication. They are maintenance-free.

8.18.2 Cleaning

Clean the product regularly depending on the degree of soiling and frequency of use, at least 1x per month:
• Clean the control panel, battery charger, armrest and trim components with a damp cloth and mild cleaning
solution.
• Use a dry brush to clean the seat and back upholstery as well as the seat cushion.
• Use a damp plastic brush to clean the wheels and frame.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Do not spray the product with a pressure washer.
• Observe additional cleaning instructions:
– Section "Lap belt": see Page 48
– Section "Belts/belt systems": see Page 60
– Section "Contoured pads": see Page 39

8.18.3 Disinfection

1) Thoroughly clean the pads before disinfecting.
2) Wipe all parts of the product with a disinfectant.
Important information about disinfecting
• Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
• Prior to disinfection, clean the seat and back padding, control panel and armrests.

9 Maintenance and repair

9.1 Maintenance

WARNING
Insufficient maintenance
Severe user injuries, damage to the product due to failure to observe maintenance intervals
► Only carry out the maintenance tasks described in this section. All other maintenance and service tasks may
only be carried out by qualified personnel.
► The functionality and operating safety of the product must be verified and a service performed at least
once per year.
► For users with a changing anatomy (for example body dimensions, weight) or users with a changing clinical
picture, have the product inspected, adjusted and serviced at least once every six months.
C1000 DS
Maintenance and repair
69