Control Elements For Cockpit App - Otto Bock Kenevo 3C60 Instructions For Use Manual

INFORMATION
After activating the "visibility" of the component (holding the component with the sole of the foot facing up, or con­
necting and then disconnecting the battery charger), the component can be recognised by another device
(e.g. smartphone) within 2 minutes. If registration or establishing the connection takes too long, the process of
establishing a connection is cancelled. In this case, hold the component with the sole of the foot facing up again,
or connect and then disconnect the battery charger.

7.2 Control elements for cockpit app

1
Product
2
1. Basic Mode Bicycle ergometer
5
6
100%
1. Basic Mode
Kenevo 3C60/3C60=ST
1. Access the navigation menu (see page 80)
2. Product
The component name can only be changed with the adjustment soft­
change
ware.
3
3. If connections to more than one component have been saved, you can
switch between the saved components by tapping the change option
(see page 80).
4
4. If the "Intuitive bicycle ergometer function" function has been
enabled in the adjustment software and in the Cockpit app, this function
can be activated manually by tapping the "Bicycle ergometer"
MyMode and confirming with "OK". See the section "Using a bicycle
ergometer" (see page 88) for further information.
5. Currently selected mode
7
6. Charge level of the component.
8
Component battery fully charged
Component battery empty
Component battery charging
The current charge level is also displayed in %.
7. Display of and designation for the currently selected mode (e.g. 1.
Basic Mode)
8. Connection to component has been established
Connection to component has been interrupted. The app is attempt­
ing to re-establish the connection automatically.
No existing connection to the component.
Cockpit app
79