Changing The Prosthesis Setting Using The Cockpit App - Otto Bock Kenevo 3C60 Instructions For Use Manual

Use

8.6.1 Changing the prosthesis setting using the cockpit app

The following parameters can be modified:
INFORMATION
Number of parameters depending on selected activity mode
Some parameters are not available depending on the currently selected activity mode.
Parameter
Resistance
Intuitive stance function¹ 0/Off – deactiv­
Intuitive bicycle
ergometer function¹
Wheelchair function¹
Sitting function¹
90
1) Once the component is connected and in the desired mode, tap the
icon in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
icons.
INFORMATION: The O&P professional's setting is marked and,
after the setting has been changed, can be restored by tapping
the "Standard" button.
Adjustment soft­ Cockpit app
ware range adjustment
range
120 to 180 +/- 10 of the con­
figured value
0/Off – deactiv­
ated ated
1/On – activated 1/On – activated
0/Off – deactiv­ 0/Off – deactiv­
ated ated
1/On – activated 1/On – activated
0/Off – deactiv­ 0/Off – deactiv­
ated ated
1/On – activated 1/On – activated
0/Off – deactiv­ 0/Off – deactiv­
ated ated
1/On – activated 1/On – activated
Meaning
Flexion resistance while sitting down, in the
stance phase, while walking on ramps and
stairs.
Information about this function is provided in
the section "Stance function" (see see
page 86)
Information about this function is provided in
the section "Using a bicycle ergometer"
(see see page 88)
Information about this function is provided in
the section "Using a wheelchair" (see see
page 89)
When the function is activated, the resistance
in the flexion direction while sitting is reduced
in addition to the reduction of resistance in
the extension direction.
Kenevo 3C60/3C60=ST