Otto Bock Axon-Bus Prosthetic System Transcarpal Instructions For Use Manual page 26

NOTICE
Charging the Axon-Bus prosthetic system with an incorrect power supply/battery char­
ger
Damage to the Axon-Bus prosthetic system due to incorrect voltage, current or polarity.
Use only power supply units/battery chargers approved for the Axon-Bus prosthetic system
►
by Ottobock (see instructions for use and catalogues).
NOTICE
Contact of the charging plug with magnetic data carriers
Wiping of the data carrier.
Do not place the charging plug on credit cards, diskettes, audio or video cassettes.
►
INFORMATION
The Axon-Bus prosthetic system cannot be used as long as the charging plug is connected to
the charging receptacle. The Axon-Bus prosthetic system is deactivated for the duration of char­
ging.
5 Scope of Delivery and Accessories
5.1 Scope of delivery
The product is delivered preinstalled. The scope of delivery includes:
• 1 pc. Axon-Bus transcarpal prosthetic system
• 757L500 AxonCharge Integral
• 1 pc. Instructions for use (user)
• 1 pc. prosthesis passport
• 1 pc. cosmetic case for battery charger and power supply
5.2 Accessories
The following components are not included in the scope of delivery and may be ordered separ­
ately:
• 4X500 AxonCharge Mobile
• 757S500=* AxonCharge adapter
• 8S501=* AxonSkin Natural for men (different skin colours)
• 8S502=* AxonSkin Natural for women (different skin colours)
• 8S500=* AxonSkin Visual (sheer, translucent)
• 8S511=* AxonSkin Silicone for men (different skin colours)
• 8S512=* AxonSkin Silicone for women (different skin colours)
6 Charging the battery
The following points must be observed when charging the battery:
• The capacity of a fully charged battery is sufficient for one full day.
• We recommend charging the product every day when used on a daily basis.
• The battery should be charged for at least 3 hours prior to initial use.
• Use the 757L500 battery charger to charge the battery.
6.1 Connecting the power supply and battery charger
1) Slide the country-specific plug adapter onto the power supply until it locks into place (see
fig. 1).
26