Otto Bock C-Leg 4 Certification Course Complete page 79

Alignment and adjustment
Flexion stops
•
When delivered the C-Leg 4 is equipped with the 4H95
flexion stops (= 8° less flexion angle) → optional 4H106
flexion stops with 16° are available
•
With the stops installed, the maximum flexion angle is:
122° with 8° flexion stops (4H95)
•
114°with 16° flexion stops (4H106)
•
•
The flexion stops can be switched with an appropriate
wrench (TORX TX10)
•
When assembling tighten the screws to 1 Nm and
secure the screws with a thread locking compound
•
INFORMATION: Do not insert screws without flexion
stops!
Certification course | C-Leg 4 | Global Academy | 25.09.2019 | © Ottobock 79