Service And Warranty Concept
Service procedure
In both cases the adjustments have to be checked
and the values have to be changed if necessary.
•
After service inspection, a label is attached to the knee
that will brief the CPO about the retention of the knee
joint adjustments
•
It is not always possible to preserve the adjusted
values during the service process
therefore the adjustments are reset to the factory
defaults (yellow label)
The individual settings have to be adjusted again or
the user profile in C-Soft Plus has to be transferred
to the knee joint
•
A blue label signifies that the data has been preserved
Certification course | C-Leg 4 | Global Academy |
25.09.2019
| © Ottobock
150