Otto Bock C-Leg 4 Certification Course Complete page 156

Service And Warranty Concept
Installing the axis caps (pear-shaped covers)
Follow the procedure described in the manual when
1. Have the user take off the joint and switch it off.
2. Inspect the joint for damage.
3. Check the cable at the battery cover for damage
(broken insulation, exposed wires...).
4. Inspect the O-ring in the battery cover.
5. Check the alignment of the battery cover.
6. Verify that the ferrite bead is present and check it for
damage (only black cable).
7. Insert the retaining lug of the pear-shaped cover into
the bore hole.
8. Press the pear-shaped cover into the recess until it
locks / clicks into place.
9. Switch on the knee joint and let it perform a self-test.
installing axis caps!
Certification course | C-Leg 4 | Global Academy |
see
manual
25.09.2019 | © Ottobock 156