Download Print this page

Otto Bock Axon-Bus Instructions For Use Manual page 30

Prosthetic system

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
Therefore, keeping a minimum distance of 30 cm to HF communication devices is recom­
mended.
CAUTION
Wearing in extreme ambient temperatures
Injury due to faulty control or malfunction of the Axon-Bus prosthetic system.
Avoid wearing the prosthesis in areas with temperatures outside of the permissible range
(see page 39).
4.5 Information on Use
CAUTION
Using the prosthesis with pointed or sharp objects (e.g. knives in the kitchen)
Injury due to unintentional movements.
Use extra caution when using the prosthesis for handling pointed or sharp objects.
CAUTION
Overloading due to unusual activities
Injury due to unexpected behaviour of the Axon-Bus prosthetic system because of malfunction.
The Axon-Bus prosthetic system was developed for everyday use and must not be used for
unusual activities. These unusual activities include, for example, sports with excessive strain
and/or shocks to the wrist joint (pushups, downhill mountain biking, ...) or extreme sports
(free climbing, paragliding, etc.).
Careful handling of the Axon-Bus prosthetic system and the Axon-Bus components not only
increases their service life, but is primarily in the interest of your own safety.
If the Axon-Bus prosthetic system and the Axon-Bus components have been subjected to
extreme loads (e.g. through a fall or similar occurrence) the prosthesis system must be
inspected by a prosthetist immediately for possible damage. If necessary, the prosthetist will
forward the prosthesis system to an authorised Ottobock Service Centre.
CAUTION
Mechanical stress on the Axon-Bus prosthetic system
Injury due to faulty control or malfunction of the Axon-Bus prosthetic system.
Do not subject the Axon-Bus components to mechanical vibrations or impacts.
Check the Axon-Bus components for any visible damage before each use.
CAUTION
Changing Axon-Bus gripping components when switched on
Injury due to faulty control or malfunction of the Axon-Bus prosthetic system.
Power down the Axon-Bus prosthetic system by pressing the button in the charging recept­
acle before changing any Axon-Bus components (e.g. Axon-Bus gripping component).
CAUTION
Penetration of dirt and moisture in the Axon-Bus components
Injury due to faulty control or malfunction of the Axon-Bus prosthetic system.
Ensure that neither solid particles nor liquids can penetrate into the Axon-Bus prosthetic sys­
tem or Axon-Bus components (e.g. the Axon-Bus gripping component).
30

Advertisement

loading