Logged-In Users Report - Cisco Servers User Manual

Chapter 9 Working with Logging and Reports

Logged-In Users Report

Note
Viewing the Logged-in Users Report
Step 1
Step 2
78-13751-01, Version 3.0
The Logged-in Users report lists all users currently receiving services for a single
AAA client or all AAA clients with access to Cisco Secure ACS.
To use the logged-in user list feature, your AAA client must perform
authentication and accounting using the same protocol—either TACACS+ or
RADIUS.
Topics regarding this report include the following:
• Enabling a Logged-in Users Report—The Logged-in Users report is always
enabled. You cannot disable this report.
• Viewing a Logged-in Users Report—For instructions on viewing the
Logged-in User report in the HTML interface, see the
Logged-in Users Report" section on page
Configuring a Logged-in Users Report—The Logged-in Users report is
•
only available in the HTML interface. There are no configuration options for
the Logged-in Users report.
• Deleting Logged-in Users—For instructions about deleting logged-in users
from specific AAA clients or from all AAA clients, see the
Logged-in Users" section on page
To view the Logged-in Users report, follow these steps:
In the navigation bar, click Reports and Activity.
Click Logged-in Users.
Result: The Select a AAA Client page displays the name of each AAA client, its
IP address, and the number of users logged in through the AAA client. At the
bottom of the table, the All AAA Clients entry shows the total number of users
logged in.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
About Cisco Secure ACS Logs and Reports
"Viewing the
9-11.
9-12.
"Deleting
9-11