Cisco Servers User Manual page 544

Creating a CiscoSecure User Database
To create a CiscoSecure user database, follow these steps:
If you have not performed a backup or dump of the CiscoSecure user database, do
Step 1
so now before proceeding. For more information about backing up the database,
see the
On the Cisco Secure ACS server, open an MS DOS command prompt and change
Step 2
directories to the directory containing CSUtil.exe. For more information about the
location of CSUtil.exe, see the
on page
If the CSAuth service is running, type:
Step 3
net stop csauth
and press Enter.
Result: The CSAuth service stops.
Type:
Step 4
CSUtil.exe -n
and press Enter.
Result: CSUtil.exe displays a confirmation prompt.
Step 5 To confirm that you want to initialize the CiscoSecure user database, type Y and
press Enter.
Result: The CiscoSecure user database is initialized. This process may take a few
minutes.
Step 6 To resume user authentication, type:
net start csauth
and press Enter.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
E-8
Appendix E
"Backing Up Cisco Secure ACS with CSUtil.exe" section on page
E-2.
Cisco Secure ACS Command-Line Database Utility
"Location of CSUtil.exe and Related Files" section
E-5.
78-13751-01, Version 3.0