Cisco Servers User Manual page 468

Database Group Mappings
Step 5
Step 6
Step 7
Step 8
Deleting a Windows NT/2000, Novell NDS, or Generic LDAP Group Set Mapping
Step 1
Step 2
Step 3
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
12-18
If you are editing a Novell NDS group set mapping, click the name of the Novell
NDS tree for which you want to edit a group set mapping.
Result: The Group Mappings for NDS Users table appears.
Click the group set mapping to be edited.
Result: The Edit mapping for database page opens. The external user database
group or groups included in the group set mapping appear above the CiscoSecure
group list.
From the CiscoSecure group list, select the name of the group to which the set of
external database groups should be mapped, and then click Submit.
You can also select <No Access>. For more information about the <No
Note
Access> group, see the
section on page
Click Submit.
Result: The Group Mappings for database page opens again with the changed
group set mapping listed.
You can delete individual group set mappings.
To delete a Windows NT/2000, Novell NDS, or generic LDAP group mapping,
follow these steps:
In the navigation bar, click External User Databases.
Click Database Group Mappings.
Click the external user database configuration whose group set mapping you need
to delete.
Result: If you are deleting a Windows NT/2000 group set mapping, the Domain
Configurations table appears. If you are deleting an NDS group set mapping, the
NDS Trees table appears. Otherwise, the Group Mappings for database Users
table appears.
Chapter 12
"No Access Group for Group Set Mappings"
12-14.
Administering External User Databases
78-13751-01, Version 3.0