Cisco Servers User Manual page 520

IETF Dictionary of RADIUS AV Pairs
Table D-7 RADIUS (IETF) Attributes (continued)
No. Attribute
14 Login-IP-Host
15 Login-Service
16 Login-TCP-Port
18 Reply-Message
22 Framed-Route
24 State
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
D-14
Description
Host to which the user will connect when the Login-Service attribute is
included.
Service that should be used to connect the user to the login host.
Service is indicated by a numeric value as follows:
0: Telnet
1: Rlogin
2: TCP-Clear
3: PortMaster
4: LAT
TCP (Transmission Control Protocol) port with which the user is to be
connected when the Login-Service attribute is also present.
Text to be displayed to the user.
Routing information to be configured for the user on this AAA client.
The RADIUS RFC (Request for Comments) format (net/bits [router
[metric]]) and the old style dotted mask (net mask [router [metric]]) are
supported. If the router field is omitted or 0 (zero), the peer IP address
is used. Metrics are currently ignored.
Allows State information to be maintained between the AAA client and
the RADIUS server. This attribute is applicable only to CHAP
challenges.
Appendix D RADIUS Attributes
78-13751-01, Version 3.0