Cisco Servers User Manual page 519

Appendix D RADIUS Attributes
Table D-7 RADIUS (IETF) Attributes (continued)
No. Attribute
6 Service-Type
7 Framed-Protocol
8 Framed-IP-Address
9 Framed-IP-Netmask
10 Framed-Routing
11 Filter-Id
12 Framed-MTU
13 Framed-Compression
78-13751-01, Version 3.0
Description
Type of service requested or type of service to be provided:
In a request:
Framed—For known PPP or SLIP (Serial Line Internet Protocol)
connection.
Administrative User—For enable command.
In a response:
Login—Make a connection.
Framed—Start SLIP or PPP.
Administrative User—Start an EXEC or enable ok.
Exec User—Start an EXEC session.
Framing to be used for framed access.
Address to be configured for the user.
IP netmask to be configured for the user when the user is a router to a
network. This attribute-value results in a static route being added for
Framed-IP-Address with the mask specified.
Routing method for the user when the user is a router to a network. Only
None and Send and Listen values are supported for this attribute.
Name of the filter list for the user, formatted as follows: %d, %d.in, or
%d.out. This attribute is associated with the most recent service-type
command. For login and EXEC, use %d or %d.out as the line access list
value from 0 to 199. For Framed service, use %d or %d.out as interface
output access list and %d.in for input access list. The numbers are
self-encoding to the protocol to which they refer.
Indicates the maximum transmission unit (MTU) that can be configured
for the user when the MTU is not negotiated by PPP or some other
means.
Compression protocol used for the link. This attribute results in
"/compress" being added to the PPP or SLIP autocommand generated
during EXEC authorization. Not currently implemented for non-EXEC
authorization.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
IETF Dictionary of RADIUS AV Pairs
D-13