Csutil.exe Options - Cisco Servers User Manual

Appendix E Cisco Secure ACS Command-Line Database Utility

CSUtil.exe Options

78-13751-01, Version 3.0
You can combine many of the options in a single use of CSUtil.exe. If you are new
to using CSUtil.exe, we recommend performing only one option at a time, with
the exception of those options, such as -p, that must be used in conjunction with
other options.
Experienced CSUtil.exe users may find it useful to combine CSUtil.exe options,
such as the following example, which would first import AAA client
configurations and then generate a dump of all Cisco Secure ACS internal data:
CSUtil.exe -i newnases.txt -d
CSUtil.exe can perform several actions. The options, listed below in alphabetical
order, are detailed in later sections of this chapter.
• -b—Backup system to a specified filename. For more information about this
option, see the "Backing Up Cisco Secure ACS with CSUtil.exe" section on
page E-5.
-c—Recalculate database CRC values. For more information about this
•
option, see the "Recalculating CRC Values" section on page
-d—Export all Cisco Secure ACS internal data to a file named
•
Using this option requires that you stop the CSAuth service. For more
information about this option, see the
Database Dump File" section on page
-e—Decode internal Cisco Secure ACS error numbers to ASCII message. For
•
more information about this option, see the
section on page E-25.
• -g—Export group information to a file named
requires that you stop the CSAuth service. For more information about this
option, see the "Exporting Group Information to a Text File" section on
page E-24.
• -i—Import user or AAA client information from a file named
a specified file. For more information about this option, see the
User and AAA Client Information" section on page
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
CSUtil.exe Options
"Creating a Cisco Secure ACS
E-9.
"Decoding Error Numbers"
. Using this option
groups.txt
E-13.
E-26.
.
dump.txt
or
import.txt
"Importing
E-3