Cisco Servers User Manual page 168

Common User Group Settings
To configure the max sessions settings for a user group, follow these steps:
In the navigation bar, click Group Setup.
Step 1
Result: The Group Setup Select page opens.
From the Group list, select a group, and then click Edit Settings.
Step 2
Result: The Group Settings page displays the name of the group at its top.
In the Max Sessions table, under Sessions available to group, select one of the
Step 3
following two options:
•
•
In the lower portion of the Max Sessions table, under Sessions available to users
Step 4
of this group, select one of the following two options:
•
•
Note
To save the group settings you have just made, click Submit.
Step 5
For more information, see the
on page
To continue specifying other group settings, perform other procedures in this
Step 6
chapter, as applicable.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
6-12
Unlimited—Select to allow this group an unlimited number of simultaneous
sessions. (This effectively disables Max Sessions.)
n—Type the maximum number of simultaneous sessions to allow this group.
Unlimited—Select to allow each individual in this group an unlimited
number of simultaneous sessions. (This effectively disables Max Sessions.)
n—Type the maximum number of simultaneous sessions to allow each
individual in this group.
Settings made in User Setup override group settings. For more
information, see the
section on page 7-17.
6-50.
Chapter 6 Setting Up and Managing User Groups
"Setting Max Sessions Options for a User"
"Saving Changes to User Group Settings" section
78-13751-01, Version 3.0