Cisco Servers User Manual page 300

RDBMS Synchronization
b.
c.
Step 4 To have this Cisco Secure ACS server perform RDBMS synchronization at
regular intervals, under Synchronization Scheduling, select the Every X minutes
option and in the X box type the length of the interval at which Cisco Secure ACS
should perform synchronization.
Step 5 To schedule times at which this Cisco Secure ACS server performs RDBMS
synchronization, follow these steps:
a.
b.
Clicking times of day on the graph selects those times; clicking again clears
Tip
them. At any time you can click Clear All to clear all hours, or you can click
Set All to select all hours.
Step 6 For each Cisco Secure ACS server you want to synchronize with data from the
accountActions table, follow these steps:
Note
a.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
8-38
In the Username box, type the username for a database user account that has
read/write access to the accountActions table.
In the Password box, type the password for the username specified in the
previous step.
Under Synchronization Scheduling, select the At specific times option.
In the day and hour graph, click the times at which you want
Cisco Secure ACS to perform replication.
For more information about synchronization targets, see the
"Replication Partners Options" section on page
In the Synchronization Partners table, from the AAA Servers list, select the
name of a Cisco Secure ACS server that you want this Cisco Secure ACS
server to update with data from the accountActions table.
The Cisco Secure ACS servers available in the AAA Servers list
Note
is determined by the AAA Servers table in Network
Configuration, with the addition of the name of the current
Cisco Secure ACS server. For more information about the AAA
Servers table, see the
page 4-15.
Chapter 8 Establishing Cisco Secure ACS System Configuration
"AAA Server Configuration" section on
8-15.
78-13751-01, Version 3.0