Editing A Downloadable Pix Acl - Cisco Servers User Manual

Downloadable PIX ACLs
Step 5
Step 6
Step 7

Editing a Downloadable PIX ACL

Step 1
Step 2
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
5-4
The name of a PIX ACL may contain up to 32 characters. The name
Note
may contain spaces; but it may not contain leading, trailing, or
multiple spaces, or the following characters: - [ ] / —
In the Description: box, type a description of the new PIX ACL.
In the ACL Definitions box, type the new PIX ACL definitions.
Note In entering the ACL definitions in the ACS HTML interface, you do
not use keyword and name entries; rather, you begin with a
permit/deny keyword. For an example of the proper format of the ACL
definitions, see the
page 5-2.
When you have completed specifying the PIX ACL, click Submit.
Result: Cisco Secure ACS enters the new PIX ACL, which takes effect
immediately. That is, it is available to be sent to any PIX Firewall that is
attempting authentication of a user who has that ACL name as part of his or her
user or group profile. For information on assigning a user or a group to a PIX
ACL, see the "Assigning a PIX ACL to a User" section on page 7-22
"Assigning a Downloadable PIX ACL to a Group" section on page
respectively.
To edit a downloadable PIX ACL, follow these steps:
In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page appears.
Click Downloadable PIX ACLs.
Result: The Downloadable PIX ACLs table appears.
Chapter 5 Setting Up and Managing Shared Profile Components
"About Downloadable PIX ACLs" section on
or the
6-27,
78-13751-01, Version 3.0