Cisco Servers User Manual page 226

Basic User Setup Options
network fails, the quota is not updated. In the case of multiple sessions, such as
with ISDN, the quota is not updated until all sessions terminate, which means that
a second channel will be accepted even if the first channel has exhausted the user's
quota.
To set usage quota options for a user, follow these steps:
Step 1 Perform Steps 1 through 3 of the
page
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
In the Usage Quotas table, select Use these settings.
Step 2
Step 3 To define a usage quota based on duration of sessions for a user, follow these
steps:
a.
b.
c.
To define usage quotas based on the number of sessions for a user, follow these
Step 4
steps:
a.
b.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
7-20
7-5.
Select the Limit user to x hours of online time check box.
Type the number of hours to which you want to limit the user in the Limit
user to x hours of online time box. Use decimal values to indicate minutes.
For example, a value of 10.5 would equal 10 hours and 30 minutes.
Select the period for which you want to enforce the time usage quota:
per Day—From 12:01 a.m. until midnight
•
per Week—From 12:01 a.m. Sunday until midnight Saturday
•
• per Month—From 12:01 a.m. on the first of the month until midnight on
the last day of the month
• Absolute—A continuous, open-ended count of hours
Select the Limit user to x sessions check box.
Type the number of sessions to which you want to limit the user in the Limit
user to x sessions box.
Chapter 7 Setting Up and Managing User Accounts
"Adding a Basic User Account" section on
78-13751-01, Version 3.0