Cisco Servers User Manual page 298

RDBMS Synchronization
Step 3 To specify options in the RDBMS Setup table, follow these steps:
Note
a.
b.
c.
Result: Cisco Secure ACS has the information necessary to access the
accountActions table.
It is not necessary to select Manually under Replication Scheduling. For more
Note
information, see the
section on page
For each Cisco Secure ACS that you want this Cisco Secure ACS server to update
Step 4
with data from the accountActions table, select the Cisco Secure ACS server in
the AAA Servers list, and then click —> (right arrow button).
Result: The selected Cisco Secure ACS server appears in the Synchronize list.
To remove Cisco Secure ACS servers from Synchronize list, select the
Step 5
Cisco Secure ACS server in the Synchronize list, and then click <— (left arrow
button).
Result: The selected Cisco Secure ACS server appears in the AAA Servers list.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
8-36
For more information about RDBMS setup, see the
Options" section on page
From the Data Source list, select the system DSN you configured to
communicate with the database that contains your accountActions table.
For more information about configuring a system DSN for use with RDBMS
Synchronization, see the
RDBMS Synchronization" section on page
In the Username box, type the username for a database user account that has
read/write access to the accountActions table.
In the Password box, type the password for the username specified in the
previous step.
"Disabling Scheduled RDBMS Synchronizations"
8-39.
Chapter 8 Establishing Cisco Secure ACS System Configuration
8-34.
"Configuring a System Data Source Name for
8-32.
"RDBMS Setup
78-13751-01, Version 3.0