Advertisement
(3) When the Recovery CD Utility program is executed, all data in the
hard disk will be deleted. Be sure to save the necessary files to
other media before execution of recovery procedure. Press Enter
key to start recovery procedure. Reconfirmation message shown
below is displayed.
(4) Press [Y] key to start the recovery procedure.
When [Y] key is pressed, following messages are displayed and
procedures are executed automatically in sequence.
1. Recovering the master boot sector
2. Recovering FAT
3. Checking free clusters
4. Recovering the DOS partition
There is no "suspend to disk partition" in UP-5900 HDI, so "5.
Recovering the suspend to disk partition" will be skipped.
(5) When the Recovery CD Utility program is completed, following
message as shown below is displayed.
[FD boot recovery]
Remove the UP-5900 Product Recovery CD-ROM from CD
drive, and press Enter key to reboot from boot FD. (In the follow-
ing steps, use only bootable FD and do not use UP-5900 Product
Recovery CD-ROM.)
[CD boot recovery]
Press Enter key to reboot from CD.
(6) The recovery menu is displayed.
(7) "Fdisk.exe" is executed and menu shown below is displayed.
(8) "Fdisk Options" are displayed.
UP-5900VS HDI RECOVERY PROCEDURES (For VK version)
7 – 3
Use [ 2 ] [ 4 ] keys to select "(2) fdisk.exe" and press Enter key.
To enable large-capacity disk support, confirm that [Y] is selected
and press Enter key.
Select "1. Create DOS Partition or Logical DOS Drive" and press
Enter key.
Advertisement
Chapters
