Download Print this page

Chapter 8. About Utility Software - Sharp UP-5900 Service Manual

Advertisement

CHAPTER 8. ABOUT UTILITY SOFTWARE

The UP-5900's utility softwere are provided by SHARP.
1. TOUCH PANEL CALIBRATION UTILITY PROGRAM
[File name] :
CALWINR. EXE
[Out line] :
This utility is for aligning press position and display position.
This utility should be used to calibrate when following case is occurred.
When touch panel driver was set up.
When touch panel device was exchanged in case like service.
Calibration data are written in "EEPROM".
This utility is composed from the following screens.
The calibration screen which does calibration operation.
The drawing test screen which confirms a pressing position and displaying position in touch panel after calibration is finished.
CAUTION :
[Function] :
The position calibration for the touch panel.
To adjust it, use the touch pen of K-PAD (Keyboard enhanced Personal Digital Assistant).
PARTS CODE
CPENP1004PCN5
2. DOUBLE TAP SETUP UTILITY PROGRAM
[File name] :
DBLTAP.EXE
[Out line] :
Double tap setup utility DBLTAP.EXE (will call utility onward) is used to improve double tap control over touch panel.
This utility can visually customize double tap recognition speed and tolerance area.
Customized value will be saved independently to each user, and automatically reflected to touch panel operation.
[Function] :
Configures tolerance distance for first tap and second tap upon double tap operation. (Area :Wide - Narrow)
Configures tolerance for time difference between first tap and second tap upon double tap operation. (Speed:Slow - Fast)
3. STAMP LOGO REGISTER UTILITY PROGRAM FOR POS PRINTER
[File name] :
PRTUTIL.EXE
[Out line] :
This utility registers stamp logo image to POS printer.
Supported printers are 2 types, UP-T80BP and ER-01PU.
[Function] :
Registration of 2 types of logo image and test print for UP-T80BP.
Registration of 1 type of logo image and test print for ER-01PU.
A full keyboard is necessary to operate this utility.
Touch panel driver must be set up in order to run this utility.
PARTS NAME
Touch pen
MODEL
K-PDA ZR-xxxx series
UP-5900VS ABOUT UTILITY SOFTWARE
8 – 1

Advertisement

loading