Installing The Alternator Cover; Installing The Valve Cover - Husqvarna FS 450 2019 Repair Manual

17 ENGINE
17.5.29
17.5.30
242

Installing the alternator cover

Installing the valve cover

D05026-10
O
Raise the rocker arm
8
Remove shims and set them down according to the
installation position.
Correct the shims based on the results of the valve clearance
check.
Insert suitable shims.
Install the camshaft. (ll!:!I
Install the timing chain tensioner.
Finishing work
- Check the valve clearance.
Position alternator cover gasket
Position the alternator cover.
8
Mount screw with the washer but do not tighten yet.
Guideline
Screw, alternator
cover
8
Mount screws and tighten all screws in a crisscross pat­
tern.
Guideline
Screw, alternator
cover
O
Position gasket of the engine vent in the valve cover.
on the outside.
p. 240)
(ll!:!I p. 240)
(8 p. 241)
O.
M6x25 10 Nm (7.4 lbf ft)
M6x25 10 Nm (7.4 lbf ft)
..
..