18.5.25 Adjusting The Valve Clearance; Installing The Torque Limiter; Installing The Alternator Cover - Husqvarna FE 250 EU 2014 Repair Manual

ENGINE
18

18.5.25 Adjusting the valve clearance

18.5.26

Installing the torque limiter

18.5.27

Installing the alternator cover

Main work
Remove the timing chain tensioner.
Remove the camshaft. (a
O.
Raise cam levers
Correct the shims according to the findings from checking the valve clearance.
Install the camshafts. (a
Install the timing chain tensioner.
Finishing work
Check the valve clearance.
O.
Position torque limiter
Position the alternator cover gasket
Position the alternator cover. Mount screws
nator cover screws have been mounted.
Guideline
I
Screw, alternator cover
@)
Mount screws and tighten once all of the alternator cover screws have been
mounted.
Guideline
I
Screw, alternator cover
C,
Mount screw with the seal ring and tighten all screws in a crisscross pattern.
Guideline
I
Screw, alternator cover
(a p. 137)
p. 137)
p. 186)
(a p. 186)
(a p. 187)
O.
8
and tighten once all of the alter­
M8x30
M8x50
M8x25
188
I
6 Nm (4.4 lbf ft)
I 6 Nm (4.4 lbf ft)
I 6 Nm (4.4 lbf ft)