Installing The Lower Triple Clamp - Husqvarna FC 450 2018 Repair Manual

6.22
Installing the lower tri�le clam�
@>
--�
.-cf>
C,
@ - o
8 - ®
, g
Main work
-
Clean the bearing and sealing elements, check for damage,
and grease .
I
High viscosity grease
-
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
-
Check whether upper steering head seal
tioned.
-
Slide on protective ring
-
Position the upper triple clamp with the handlebar.
Mount screw
-
Position the fork legs.
✓ Air bleeder screw
the front.
f)
✓ Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
H01182-11
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
FORK, TRIPLE CLAMP 6
(ll!:!I p. 304)
O
8 8.
and 0-ring
8
but do not tighten yet.
0
of the right fork leg is positioned to
of the left fork leg faces the front.
is correctly posi­
41