Husqvarna FC 450 2018 Repair Manual page 81

Adjust the control lever as shown.
✓ Control lever
Activate
✓ The suction process begins.
✓ Pressure gauge @ drops to the required value.
✓ Vacuum gauge
Determine distance
reservoir hole with the special tool.
I
Depth micrometer (T1 07S)
✓ The floating piston is located in the lowermost position.
-I
e
_I
804379-10
When the vacuum gauge reaches the required value, turn
control lever
I Guideline
4 mbar
✓ The pressure gauge increases to the required value.
When the pressure gauge reaches the specified value, turn
control lever
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the required value.
When the pressure gauge reaches the specified value, turn
control lever
Guideline
3 bar
✓ The pressure gauge drops to the required value.
SHOCK ABSORBER, LINK FORK 9
External tank
C,
Damper is set to Vacuum
set to
Vacuum.
On/Off switch (D.
I
< 0 bar
@)
drops to the required value.
14
mbar
6)
between the floating piston and
(a p. 320)
0
Oil reservoir to Equalize pressure.
0 bar
C,
Damper to Pressure.
3 bar
C,
Damper to Vacuum.
0 bar
(D
is set to Closed,
@»
and Oil reservoir is
79