Checking The Rear Brake Fluid Level - Husqvarna FC 450 2018 Repair Manual

Checking the rear brake fluid level

Warning
Danger of accidents
If the brake fluid level drops below the specified marking or the specified value, the brake system is
leaking or the brake linings are worn down.
-
Check the brake system and do not continue riding until the problem is eliminated.
A
Warning
Danger of accidents
-
Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule.
-
Detach spring
-
Loosen nut
have maximum free travel.
-
To adjust the basic position of the foot brake lever to individ­
ual requirements, loosen nut
ingly.
• Info
I
The range of adjustment is limited.
-
Turn push rod @t accordingly until you have free travel f). If
necessary, adjust the basic position of the foot brake lever.
Guideline
Free travel at foot brake
lever
-
Hold push rod @t and tighten nut •.
Guideline
Remaining nuts,
K01105-10
chassis
-
Hold screw
Guideline
Nut, foot brake lever
stop
-
Attach spring
An insufficient brake fluid level will cause the brake system to fail.
Old brake fluid reduces the braking effect.
Preparatory work
-
Check the brake linings of the rear brake.
BRAKE SYSTEM 16
O.
8
and, with push rod @t, turn it back until you
8
and turn screw
3 ... 5 mm (0.12 ... 0.2 in)
M6
fD
and tighten nut@.
M8
O.
fD
accord­
10 Nm (7.4 lbf ft)
20 Nm (14.8 lbf ft)
...
(0 p. 150)
153