Disassembling The Shock Absorber Cartridge - Husqvarna FC 450 2018 Repair Manual

6 FORK, TRIPLE CLAMP
6.15
26
804933-10

Disassembling the shock absorber cartridge

-
Remove the piston rod with the seal ring retainer.
-
Degrease and clamp the top of the piston rod.
I Clamping stand (T14016S)
-
Heat up the thread area of piston (D.
Guideline
I 50 °C (122 °F)
-
Remove piston (D.
-
Remove end stop @.
@).
-
Remove spring pack
-
Remove seal ring retainer
Preparatory work
-
Disassemble the fork legs.
Main work
-
Allow oil to drain from breathing hole
-
Degrease and clamp the top of the shock absorber cartridge.
I Clamping stand (T14072)
8-
-
Loosen screw cap
1
Special socket (T14084)
-
Remove screw cap with shock absorber unit@).
(8 p. 322)
0.
(8 p. 21)
O.
(8 p. 323)
(0 p. 324)