Checking The Oil Pressure - Husqvarna FC 450 2018 Repair Manual

20.5
Checking the oil �ressure
LUBRICATION SYSTEM
Main work
-
Place an appropriate container under the engine.
O.
-
Remove screws Remove the oil filter cover with the O-
ring.
-
Remove the oil filter.
I
Lock ring plier (51012011000)
-
Position special tool f!} with the O-ring. Mount and tighten
the screws.
I Guideline I
Screw, oil filter cover
I
Oil pressure adapter (79429094000)
-
Connect the pressure testing tool to the special tool without
the T-plate.
I
Pressure testing tool (61029094000)
-
Check the engine oil level.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
-
Start the engine and let it warm up.
-
Check the oil pressure.
Oil pressure
Engine oil temperature:
80 °C (176 °F)
Engine speed: Idle
speed
Engine oil temperature:
80 °C (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check all oil channels
for free flow.
-
Switch off the engine.
(IUI p. 309)
M6 10 Nm (7.4 lbf ft)
(IUI p. 318)
(0 p. 312)
(0 p. 262)
Exhaust gases are toxic and
0.6 bar (9 psi)
1 . 7 bar (25 psi)
20
267