Husqvarna FC 450 2018 Repair Manual page 77

SHOCK ABSORBER, LINK FORK 9
Mount rebound washer
Mount compression shim stack
facing downward.
G02057-10
Sand down piston Q) on both sides on a surface plate using
1200 grit sandpaper.
Clean the piston.
Mount the piston.
Guideline
Viewf)
ViewG,
Mount rebound shim stack @ with the smaller washers fac­
ing upward.
G02058-10
Mount washer
C,
with cut-out facing down.
0
with the smaller washers
of piston from above
of piston from below
@)
with the groove facing downward.
75